Technical Performance
Cycle Characteristics: 96 seconds | Touch Free Open | Sanitization Cycle | 4 kg load
Water: 26 litres per cycle used | 5.5 litres per minute cold water
Electricity: 1300 W motor | < 0.01 kWh per cycle | 230V / or 400V
Inlet, Outlet & Cistern: ¾” BSP Inlet | 2” BSP multi-fit P-trap Outlet
Metrics: W: 432 mm | H: 946 mm | D: 607 mm | Dry Weight: 83 kg
Feature Detail
Isolator For single and three phase machines.
20 amp Isolator to I.E.C. standards.
Water Pump Self-primed from the cistern. Horizontally mounted only Electric centrifugal pump.
Maximum Loading Pulp Products Only Incontinence Pads - maximum four small single or two large Disposable sanitary products,
nappies and wipes - maximum hopper fill of two thirds capacity.
Pipework Connections Mains inlet ¾” B.S.P. female connection, on hose attached to the machine.
To be connected to a ¾” B.S.P. male stub and isolating valve.
Rigid pipe-work only. (Supplied by customer)
Waste Drain Outlet To be connected to a 2 inch (50mm) B.S.P multifit P trap
Mains Water Inlet Flow Rate Required flow rate. Minimum 1.5US gallons (5.68liters) per minute
Water regulated to 9 lpm maximum.
Cistern 16.6 Litres Capacity.
Inlet protected by an ‘Air gap EN 13076, Family A, type A’.
Cistern Overflow Indicator Never connect the overflow indicator stub to the drain. Ensure any discharge is Visible
Direction Of Rotation For Macerator Motor Single phase machines are supplied with the correct rotation. Three phase machines must
be checked - Clockwise direction only when looking into the hooper.
Weight Of Machine 93 kg.
Mounting Floor
9 mm / 3/8” base clearance holes for 8 mm securing bolts.
Incomaster Incontinence waste disposal
Delivering real and measurable benefits to both you and those in your care, our highly efficient and user friendly Incomaster delivers outstanding performance for the simple and hygienic disposal of disposable incontinence products. Designed for simplicity, it is easy to install, low maintenance and fast. The Incomaster can process four small pads or two large briefs in less than two minutes.
Incomaster is designed to meet the demands of incontinence waste disposal in your care environment, reducing the load on your hazardous waste collections and deep-landfill. Using only cold water and either 1 or 3 phase electrical supply, the Incomaster costs per cycle are minimal. With a smart proactive support package, the whole life costs of the system are highly attractive compared to the alternatives, with all the additional benefits of reduced odour and infection control as well.